It glues almost all solid and flexible materials such as many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®) and phenolic resins (Bakelite®), leather, porcelain, ceramics, metal, , felt, cloth (check suitability first) and rubber; only partially suitable for glass (after a period of time the bond becomes brittle, causing it to weaken).
Do not use at temperatures below +10°C. Glue responds optimally to an air humidity level of 50-70%.
You need to be careful when using, especially with regard to children and contact with skin and eyes. The materials to be glued must be clean, dry, have no dust and oiliness and apply correctly.
Any dust, oils, fats, wax or separation agents should be thoroughly removed from the surfaces to be glued. The best way to achieve this is to rub the parts sometimes with appropriate solvents, such as acetone (if this is appropriate for the material – first check!).
For metals and metal alloys it is usually enough to explod the surface, using emery paper or by rubbing or brushing. 1. To drill the film, twist the lid clockwise onto the tube. Tip: Do not press the tube while drilling. 2. Unscrew the lid to bring up the applicator - ready! Apply the glue directly from the tube, using the nozzle as thinly as possible on one side (too much glue significantly slows down the hardening process!). Squeeze the parts together immediately. Surfaces that need to be glued together should have exactly the same shape and size. After use (if the tube is not yet empty), clean the nozzle with dry paper and close the tube, with the lid.
*3x sealed pipes.
*Ideal and quality for every application.
*In a handy storage box.
*Reaches the smallest corners and joints.
